Installing a Brick Paver Walkway or Red Bricks

The usage of Bricks or Pavers to create a walkway or outdoor patio complements a home in a way that is unequaled. In addition, setting up a Brick or Paver pathway does not necessarily need a pro.

The key to installing a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be set up. The location needs to be dug out a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines need to be strung on each side of the sidewalk. The string lines show the completed height of the sidewalk.
Once the area has been dug down, 3/4" gravel stone need to be laid in and tamped down securely. Then 2" of sand, or stone dust need to be spread out over the gravel. Once again the sand/stone dust must be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline ought to equate to the thickness of the brick or paver.

Now that you have a stable base, position a 1" pipe or journal board the length of the walkway on either side of the walkway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now put on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will serve as your sidewalk border and assistance to maintain the integrity and shape of the pathway. You can get these plastic strip borders at the majority of home improvement stores. The strips ought to be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.

The key to laying the bricks/pavers is to ensure that they interlock with more info each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the stability of the pathway.

Inevitably bricks/pavers will need to be cut or split when developing the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you desire to break the brick. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, build up the outdoors edges with additional sand, and after that shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the cracks. Repeat this process a number of times to guarantee the cracks are fully filled. This will complete the interlocking of the bricks and assist to get rid of any weed development. Simply include turf seed to the outdoors edges and you need to have a gorgeous entryway to your home within a number of weeks.

In addition, installing a Brick or Paver walkway does not always need a pro. The key to setting up a Brick or Paver Walkway is click here to first properly prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, position a 1" pipe or ledger board the length of the sidewalk on either side of the sidewalk. These strips will act as your pathway border and help to preserve the stability and shape of the sidewalk. Inevitably bricks/pavers will require to be cut or divided when constructing the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *